中文

S2130/S2130JB

特性

● 可冲孔加工,钻孔加工钻头使用寿命可延长
优秀的电机能
PTH可靠性取FR-4.0相称


K7

仪器仪表、信息家电、汽车电子、主动控制器、游戏机等
  • 产物机能
  • 产物证书
  • 材料下载
Items Method Condition Unit Typical Value
Tg IPC-TM-650 2.4.25 DSC 130
Td IPC-TM-650 2.4.24.6 5% wt. loss
CTE (Z-axis) IPC-TM-650 2.4.24 Before Tg ppm/℃ 60
After Tg ppm/℃ 340
50-260℃ % 5.2
Thermal Stress IPC-TM-650 2.4.13.1 288℃, solder dip -- 30S No delamination
Volume Resistivity IPC-TM-650 2.5.17.1 After moisture resistance MΩ.cm 2.9 x 108
E-24/125 MΩ.cm 8.6 x 106
Surface Resistivity IPC-TM-650 2.5.17.1 After moisture resistance 2.8 x 107
E-24/125 4.8 x 106
Arc Resistance IPC-TM-650 2.5.1 D-48/50+D-4/23 s 115
Dielectric Breakdown IPC-TM-650 2.5.6 D-48/50+D-4/23 kV 45+kV NB
Dissipation Constant (Dk) IPC-TM-650 2.5.5.9 1MHz -- 4.6



Dissipation Factor (Df) IPC-TM-650 2.5.5.9 1MHz -- 0.016




Peel Strength(1Oz HTE copper foil) IPC-TM-650 2.4.8 A N/mm
After thermal Stress 288℃,10s N/mm 1.9
125℃ N/mm 1.7
Flexural Strength LW IPC-TM-650 2.4.4 A MPa 400
CW IPC-TM-650 2.4.4 A MPa 320
Water Absorption IPC-TM-650 2.6.2.1 E-1/105+D-24/23 % 0.11
CTI IEC60112 A Rating PLC 3
Flammability UL94 C-48/23/50 Rating V-0
E-24/125 Rating V-0

K7

1. Specification sheet: IPC-4101/12, is for your reference only.

2. All the typical value is based on the 1.6mm specimen.

3. All thetypical values listed above are for your reference only and not intended forspecification. Please contact Shengyi Technology Co., Ltd. for detailedinformation. All rights from this data sheet are reserved by Shengyi TechnologyCo., Ltd.

Explanation:C=Humidity conditioning, D=Immersion conditioning in distilled water,E=Temperature conditioning

Thefirst digit following the letter indicates the duration of preconditioning inhours, the second digit the preconditioning temperature in andthe third digit the relative humidity.